BATIFAST TFP/Tx30 3C 7.5x180
Generic code 280416
- Supracoat 3C treated self-tapping screw 7.5x180 flat head, Torx30, for door frames on stonework.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
- Fixing of frames, frameworks and aluminium and PVC door and window frames.
- Fixing insulation and waterproofing to concrete.
- To be used with the 64x64 galva plate (code 294667) for the attachment of rigid insulation
- To be used with 82x40R alu/zinc plate (code 294708) for fixing waterproofing (synthetic coating with rigid insulation).
- To be used with the Ø40 galva washer (code 294695) for fixing waterproofing (bituminous coating with rigid insulation).
Advantages
- Through-hole mounting, fastenings with spacing.
Technical characteristics
| Type of load |
Light load |
| Head shape |
Flat countersunk head |
| Load recovery |
400
Kg |
| Installation mode |
Installation with torx screwdriving |
| Pattern |
Torx |
| Outside body diameter |
7.5
mm |
| Supporting material |
Concrete |
| Length |
180
mm |
| Product material |
Supracoat 3C |
| Maximum thickness of the element to be fixed |
150/140/120 |
| Support drilling diameter |
6
mm |
| Minimum drilling depth |
40/50/70 |
| Minimum depth of implementation |
30/40/60 |
| Minimum thickness of base material |
60/80/100 |
| Required tightening torque |
20
Nm |
| Resistance to corrosion |
> = 30 Kesternich cycles |
| Anchoring depth |
40
mm |
| Diameter of the head |
11.5
mm |
| Diameter on thread |
7.5
mm |
| Head height |
3.5
mm |
| Thread pitch |
5.2
mm |
| Laquering |
Natural head |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover
