BATIFAST TC/ Zn
- Self-tapping screw with pointed tip /zinc plated with cylindrical head torx, for frame on masonry.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
- Fixing of wooden frames and doorframes.
Advantages
- Through-hole mounting, fastenings with spacing.
Technical characteristics
| Type of load |
Light load |
| Head shape |
Pan head |
| Load recovery |
400 Kg |
| Installation mode |
Installation with torx screwdriving |
| Pattern |
Torx |
| Outside body diameter |
7,5 mm |
| Supporting material |
Wood Concrete Solid brick Solid concrete block Hollow concrete block with prior testing Cellular concrete with prior testing Natural stone with prior testing Hollow brick with prior testing |
| Maximum thickness of the element to be fixed |
120/110/90 150/140/120 180 210 30/40/- 50/40/20 70/60/40 90/80/60 |
| Support drilling diameter |
6 mm |
| Minimum drilling depth |
40 40/50/- 40/50/70 |
| Minimum depth of implementation |
30 30/20/- 30/40/50 30/40/60 |
| Minimum thickness of base material |
60 60/80/- 60/80/100 |
| Required tightening torque |
20 Nm |
| Diameter of the head |
8,5 mm |
| Diameter on thread |
7,5 mm |
| Thread pitch |
5,2 mm |
| Laquering |
Natural head |
| Generic code | T
Type of load
|
T Emp
Pattern
|
D0
(mm)
Outside body diameter
|
L
(mm)
Length
|
Tfix maxi
Maximum thickness of the element to be fixed
|
d0
(mm)
Support drilling diameter
|
Hnom
Minimum depth of implementation
|
|
| 280420BATIFAST TC/Tx30 ZBJ 7.5x60 | Light load | Torx | 7.5 | 60 | 30/40/- | 6 | 30/20/- | |
| 280422BATIFAST TC/Tx30 ZBJ 7.5x80 | Light load | Torx | 7.5 | 80 | 50/40/20 | 6 | 30/40/60 | |
| 280424BATIFAST TC/Tx30 ZBJ 7.5x100 | Light load | Torx | 7.5 | 100 | 70/60/40 | 6 | 30/40/60 | |
| 280426BATIFAST TC/Tx30 ZBJ 7.5x120 | Light load | Torx | 7.5 | 120 | 90/80/60 | 6 | 30/40/60 | |
| 280428BATIFAST TC/Tx30 ZBJ 7.5x150 | Light load | Torx | 7.5 | 150 | 120/110/90 | 6 | 30/40/50 | |
| 280430BATIFAST TC/Tx30 ZBJ 7.5x180 | Light load | Torx | 7.5 | 180 | 150/140/120 | 6 | 30/40/60 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with DTU 43. 1: Waterproofing work on flat roofs on masonry.
