BARACO/M FM753CRACK 3DG M12/100x200
Generic code 344122
- 3DG treated M12/100x200 expansion stud with pre-mounted washer and H19 nut, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete - Applications for heavy loads.
- Fixing of facade insulation brackets (ISOLALU+ / ISOLCO) to load-bearing walls with M8 or M10 dowels.
Advantages
- C1 and C2 seismic approval (TR045)
- Safe installation, self-expanding plug.
- High strength in uncracked and cracked concrete
- Delivered complete: dowel + washer + nut mounted.
- Fire approval: 120 minutes.
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
3825
Kg |
| Drive |
19
mm |
| Installation mode |
hammer laying wrench tightened |
| Length |
200
mm |
| Support drilling diameter |
12
mm |
| Supporting material |
Concrete Cracked concrete |
| Minimum drilling depth |
80/100 |
| Product material |
3DG |
| Minimum depth of implementation |
61/81 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
120/144 |
| Effective anchoring depth |
72 |
| Maximum thickness of the element to be fixed |
120/100 |
| Hex. Head |
19
mm |
| Diameter of the passage hole |
14
mm |
| Required tightening torque |
60
Nm |
| Identification marking |
E |
| Content |
25 studs M12/100x200 3DG treated +25 washers and nuts H19 pre-assembled. |
| Outside body diameter |
12
mm |
| Diameter on thread |
12
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0293 anchors BARACO FM753 CRACK IN
- In accordance with the ETA 10 0293 anchors BARACO FM753 CRACK SSA4
- In accordance with the ETA 09 0056 anchors BARACO FM753 CRACK 3DG
-
DoP Cheville BARACO CRACKDOPDownload -
Technical Data Sheet BARACO/M FM753 CRACK 3DG M8xL M10xL M12xL M16xLTechnical datasheets
This document is reserved for our connected customers,
log in or create an account to download it. -
Homologation ETE 09-0056 Cheville BARACO FM753 CRACK /InoxHomologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Homologation European Technical Assessment : BARACO FM-753 CRACK /3DG torque-controlled expansion fastener for use in cracked and uncracked concrete.Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
ETA 10 0293 anchors BARACO FM753 CRACK SSA4Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF BARACO FM753 CRACK M12/100x200Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
-
Commercial video
