BARACO/M FM753 Zn M6/3x45
Generic code 344001
- Zinc-plated M6/3x45 expansion stud with pre-mounted washer and H10 nut, for non-cracked concrete.
Applications
- Intended use: non-cracked concrete - Applications for heavy loads.
Advantages
- Installation safety, self-expanding anchor.
- Delivered complete: dowel + washer + nut mounted.
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
3086
Kg |
| Drive |
10
mm |
| Installation mode |
wrench tightened hammer laying |
| Length |
45
mm |
| Support drilling diameter |
6
mm |
| Supporting material |
Concrete |
| Minimum drilling depth |
45 |
| Product material |
Zinc plated steel |
| Minimum depth of implementation |
36 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
30 |
| Maximum thickness of the element to be fixed |
3 |
| Hex. Head |
10
mm |
| Diameter of the passage hole |
7
mm |
| Required tightening torque |
6
Nm |
| Identification marking |
A |
| Content |
200 studs M6/3x45 zinc plated +200 preassembled washers and nuts H10. |
| Outside body diameter |
6
mm |
| Diameter on thread |
6
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 01 0014 BARACO anchors FM753 ZN
-
DOP cheville BARACODOPDownload -
Homologation ETE 01-0014 Cheville BARACO FM753 /ZNHomologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF BARACO FM753M6/3x45Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
