BARACO-M FM753 /InA4
- Expansion bolt with washer and H-nut pre-mounted /stainless steel A4, for non-cracked concrete.
Applications
- Intended use: non-cracked concrete - Applications for heavy loads.
Advantages
- Installation safety, self-expanding anchor.
- Delivered complete: dowel + washer + nut mounted.
Technical characteristics
Type of load |
Heavy load |
Load recovery |
3 086 Kg 3,086 Kg |
Installation mode |
hammer laying wrench tightened |
Supporting material |
Concrete |
Product material |
A4 Stainless steel |
Pre-assembled product |
True |
Generic code | L
(mm)
Length
|
d0
(mm)
Support drilling diameter
|
Hnom
Minimum depth of implementation
|
Hmin
Minimum thickness of base material
|
Hef
Effective anchoring depth
|
|
344221BARACO/M FM 753 InA4 M8/7x65 | 65 | 8 | 48 | 100 | 40 | |
344236BARACO/M FM 753 InA4 M8/15x75 | 75 | 8 | 48 | 100 | 40 | |
344237BARACO/M FM 753 InA4 M8/30x90 | 90 | 8 | 48 | 100 | 40 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 01 0009 anchors BARACO FM753 InA4 . Except articles codes (344209, 344208 )
Find our technical sheets and declarations of performance in the generic code product page.