BARACO/M FM753 CRACK 3DG M10/75x155
Generic code 344108
- 3DG treated M10/75x155 expansion stud with pre-mounted washer and H17 nut, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete - Applications for heavy loads.
- Fixing of facade insulation brackets (ISOLALU+ / ISOLCO) to load-bearing walls with M8 or M10 dowels.
Advantages
- C1 and C2 seismic approval (TR045).
- Safe installation, self-expanding plug.
- High strength in uncracked and cracked concrete.
- Delivered complete: dowel + washer + nut mounted.
- Fire approval: 120 minutes.
Technical characteristics
| Outside body diameter |
10
mm |
| Maximum thickness of the element to be fixed |
95/75 |
| Length |
155
mm |
| Support drilling diameter |
10
mm |
| Minimum drilling depth |
60/80 |
| Minimum depth of implementation |
47/67 |
| Minimum thickness of base material |
100/120 |
| Type of load |
Heavy load |
| Load recovery |
3825
Kg |
| Drive |
17
mm |
| Installation mode |
Wrench tightened Hammer laying |
| Supporting material |
Cracked concrete Concrete |
| Product material |
3DG |
| Pre-assembled product |
True |
| Effective anchoring depth |
60 |
| Hex. Head |
17
mm |
| Diameter of the passage hole |
12
mm |
| Required tightening torque |
40
Nm |
| Identification marking |
E |
| Content |
25 studs M10/75x155 3DG treated +25 preassembled H17 washers and nuts. |
| Diameter on thread |
10
mm |
Sold by box of 25 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 09 0056 anchors BARACO FM753 CRACK 3DG.
-
DoP Cheville BARACO CRACKDOPDownload -
Technical Data Sheet BARACO/M FM753 CRACK 3DG M8xL M10xL M12xL M16xLTechnical datasheetsDownload
-
Drawings DXF BARACO FM753 CRACK M10/75x155Drawings 2DDownload
-
Drawings IFC BARACO FM-753 Crack M10x155Drawings 3D IFCDownload
-
Drawings STEP BARACO FM 753 Crack M10x155Drawings 3D STPDownload
-
Drawings RFA BARACO FM-753 Crack M10x155Drawings 3D RFADownload
-
Commercial video
