BARACO/M FM 753 Zn M14/50x150
Generic code 344277
- Zinc-plated M14/50x150 expansion stud with pre-mounted washer and H22 nut, for non-cracked concrete.
Applications
- Intended use: non-cracked concrete - Applications for heavy loads.
Advantages
- Installation safety, self-expanding anchor.
- Delivered complete: dowel + washer + nut mounted.
Technical characteristics
| Outside body diameter |
14
mm |
| Maximum thickness of the element to be fixed |
50 |
| Length |
150
mm |
| Support drilling diameter |
14
mm |
| Minimum drilling depth |
95 |
| Minimum depth of implementation |
80 |
| Minimum thickness of base material |
140 |
| Type of load |
Heavy load |
| Load recovery |
3086
Kg |
| Drive |
22
mm |
| Installation mode |
Hammer laying Wrench tightened |
| Supporting material |
Concrete |
| Product material |
Zinc plated steel |
| Pre-assembled product |
True |
| Effective anchoring depth |
70 |
| Hex. Head |
22
mm |
| Diameter of the passage hole |
16
mm |
| Required tightening torque |
70
Nm |
| Identification marking |
D |
| Content |
25 studs M14/50x150 zinc-plated +25 preassembled washers and nuts H22. |
| Diameter on thread |
14
mm |
Sold by box of 25 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 01 0014 BARACO anchors FM753 ZN.
