BARACO/M FM 753 InA4 M6/15x65
Generic code 344208
- A4 stainless steel M6/15x65 expansion stud with pre-mounted washer and H10 nut, for non-cracked concrete.
Applications
- Recovery height 0 to 3 meters: Ø12mm stud +UM12.
- Recovery height up to 3 meters: Ø16mm stud.
- Stainless steel is mandatory if the console is made of stainless steel, if the dowel is not in an insulator; if the site is less than 3km from the coast.
Advantages
- Installation safety, self-expanding anchor.
- Delivered complete: dowel + washer + nut mounted.
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
3086
Kg |
| Drive |
10
mm |
| Installation mode |
Hammer laying Wrench tightened |
| Length |
65
mm |
| Support drilling diameter |
6
mm |
| Supporting material |
Concrete |
| Minimum drilling depth |
50 |
| Product material |
A4 Stainless steel |
| Minimum depth of implementation |
41 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
35 |
| Maximum thickness of the element to be fixed |
15 |
| Hex. Head |
10
mm |
| Diameter of the passage hole |
7
mm |
| Required tightening torque |
6
Nm |
| Identification marking |
B |
| Content |
100 studs M6/15x65 stainless steel A4 +100 pre-assembled H10 washers and nuts. |
| Outside body diameter |
6
mm |
| Diameter on thread |
6
mm |
Sold by box of 100 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Intended use: non-cracked hormigón - Applications for heavy loads.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 01 0009 anchors BARACO FM753 InA4 Except articles codes (344209, 344208 )
