BARACO/M FM 753 CRACK InA4 M10/105x185
Generic code 344308
- A4 stainless steel M10/105x185 expansion stud with pre-mounted washer and H17 nut, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete - Applications for heavy loads.
Advantages
- C1 and C2 seismic approval (TR045).
- Safe installation, self-expanding plug.
- High strength in uncracked and cracked concrete.
- Delivered complete: dowel + washer + nut mounted.
- Fire approval: 120 minutes.
Technical characteristics
| Outside body diameter |
10
mm |
| Maximum thickness of the element to be fixed |
125/105 |
| Length |
185
mm |
| Support drilling diameter |
10
mm |
| Minimum drilling depth |
60/80 |
| Minimum depth of implementation |
47/67 |
| Minimum thickness of base material |
100/120 |
| Type of load |
Heavy load |
| Load recovery |
3825
Kg |
| Drive |
17
mm |
| Installation mode |
Wrench tightened Hammer laying |
| Supporting material |
Cracked concrete Concrete |
| Product material |
A4 Stainless steel |
| Pre-assembled product |
True |
| Effective anchoring depth |
60 |
| Hex. Head |
17
mm |
| Diameter of the passage hole |
12
mm |
| Required tightening torque |
40
Nm |
| Identification marking |
F |
| Content |
25 studs M10/105x185 stainless steel A4 +25 preassembled washers and nuts H17. |
| Diameter on thread |
10
mm |
Sold by box of 25 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover-
DoP Cheville BARACO CRACK A4DOPDownload -
Technical Data Sheet BARACO/M FM753 CRACK STAINLESS STEEL M8xL M10xL M12xL M16xLTechnical datasheetsDownload
-
Drawings IFC BARACO FM-753 Crack M10x185Drawings 3D IFCDownload
-
Drawings STEP BARACO FM 753 Crack M10x185Drawings 3D STPDownload
-
Drawings RFA BARACO FM-753 Crack M10x185Drawings 3D RFADownload
