BARACO LR 7 /Zn
- Expansion stud with washer and H-nut pre-assembled/galvanized.
Applications
- Anchor for non-cracked concrete C20/25 to C50/60.
- Heavy duty applications.
- Structures subjected to a dry interior environment.
Advantages
- Easy to install.
- Shallow installation possible thanks to 2 installation depths.
- Expansion ring with rib.
- Delivered assembled with washer and nut.
- 2 installation depths: RED = reduced / STD = standard.
Technical characteristics
| Type of load |
Heavy load |
| Installation mode |
Hammer laying Wrench tightened |
| Supporting material |
Concrete Natural stone with prior testing |
| Minimum drilling depth |
38/- 43/53 48/58 90/110 |
| Product material |
Zinc plated steel |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 200 |
| Effective anchoring depth |
30/- 35/45 40/50 80/100 |
| Maximum thickness of the element to be fixed |
1/- 1/10 115/95 25/15 35/15 35/25 40/30 45/35 5/- 55/45 60/50 75/65 95/75 |
| Content |
10 studs M20x130 zinc plated +10 preassembled washers and nuts H30. 10 studs M20x160 zinc-plated +10 preassembled washers and nuts H30. 10 studs M20x240 zinc plated +10 preassembled washers and nuts H30. 10 x M20x220 zinc-plated dowels +10 pre-assembled H30 washers and nuts. 100 studs M8x100 zinc-plated +100 pre-assembled washers and nuts H13. 100 studs M8x65 zinc-plated +100 pre-assembled washers and nuts H13. 100 zinc-plated dowels M10x65 +100 pre-assembled washers and nuts H17. 100 zinc-plated dowels M8x130 +100 pre-assembled washers and nuts H13. 100 zinc-plated dowels M8x50 +100 pre-assembled washers and nuts H13. 100 zinc-plated dowels M8x80 +100 pre-assembled washers and nuts H13. 100 zinc-plated dowels M8x90 +100 pre-assembled washers and nuts H13. 100 zinc-plated M8x115 dowels + 100 pre-assembled H13 washers and nuts. 25 zinc-plated dowels M10x140 +25 pre-assembled washers and nuts H17. 50 studs M10x105 zinc plated +50 preassembled washers and nuts H17. 50 studs M10x90 zinc plated +50 preassembled washers and nuts H17. 50 zinc-plated dowels M10x120 +50 pre-assembled washers and nuts H17. 50 zinc-plated M10x75 dowels +50 pre-assembled H17 washers and nuts. |
| Generic code | L
(mm)
Length
|
d0
(mm)
Support drilling diameter
|
Hmin
Minimum thickness of base material
|
Hef
Effective anchoring depth
|
|
| 345022BARACO LR 7 ZN M8 X 90 | 90 | 8 | 100 | 35/45 | |
| 345026BARACO LR 7 ZN M8 X 115 | 115 | 8 | 100 | 35/45 | |
| 345028BARACO LR 7 ZN M8 X 130 | 130 | 8 | 100 | 35/45 | |
| 345038BARACO LR 7 ZN M10 X 65 | 65 | 10 | 100 | 40/50 | |
| 345040BARACO LR 7 ZN M10 X 75 | 75 | 10 | 100 | 40/50 | |
| 345042BARACO LR 7 ZN M10 X 90 | 90 | 10 | 100 | 40/50 | |
| 345044BARACO LR 7 ZN M10 X 105 | 105 | 10 | 100 | 40/50 | |
| 345046BARACO LR 7 ZN M10 X 120 | 120 | 10 | 100 | 40/50 | |
| 345048BARACO LR 7 ZN M10 X 140 | 140 | 10 | 100 | 40/50 | |
| 345062BARACO LR 7 ZN M20 X 130 | 130 | 20 | 200 | 80/100 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 20 0820 anchors BARACO LR7 Zn Except article code (345016 )
Find our technical sheets and declarations of performance in the generic code product page.
