BARACO-M CRACK FM753 /3DG
- Expansion dowel with washer and H-nut pre-mounted /treated 3DG, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete - Applications for heavy loads.
- Fixing of facade insulation brackets (ISOLALU+ / ISOLCO) to load-bearing walls with M8 or M10 dowels.
Advantages
- C1 and C2 seismic approval (TR045)
- Safe installation, self-expanding plug.
- High strength in uncracked and cracked concrete
- Delivered complete: dowel + washer + nut mounted.
- Fire approval: 120 minutes.
Technical characteristics
Type of load |
Heavy load |
Load recovery |
3 825 Kg |
Installation mode |
hammer laying wrench tightened |
Supporting material |
Cracked concrete Concrete |
Product material |
3DG |
Pre-assembled product |
True |
Generic code | L
(mm)
Length
|
d0
(mm)
Support drilling diameter
|
Hnom
Minimum depth of implementation
|
Hmin
Minimum thickness of base material
|
Hef
Effective anchoring depth
|
|
344088BARACO/M FM 753 CRACK 3DG M8/4x68 | 68 | 8 | 40/54 | 80/100 | 48 | |
344090BARACO/M FM 753 CRACK 3DG M8/10x75 | 75 | 8 | 40/54 | 80/100 | 48 | |
344100BARACO/M FM 753 CRACK 3DG M10/10x90 | 90 | 10 | 47/67 | 100/120 | 60 | |
344102BARACO/M FM753 CRACK 3DG M10/25x105 | 105 | 10 | 47/67 | 100/120 | 60 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0293 anchors BARACO FM753 CRACK IN. Except articles codes (344088, 344198, 344110, 344100, 344112, 344130, 344128, 344106, 344124, 344102, 344114, 344126, 344104, 344116 )
- In accordance with the ETA 10 0293 anchors BARACO FM753 CRACK SSA4
- In accordance with the ETA 09 0056 anchors BARACO FM753 CRACK 3DG
-
Homologation ETE 09-0056 Cheville BARACO FM753 CRACK /InoxHomologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Homologation European Technical Assessment : BARACO FM-753 CRACK /3DG torque-controlled expansion fastener for use in cracked and uncracked concrete.Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
ETA 10 0293 anchors BARACO FM753 CRACK SSA4Homologations
This document is reserved for our connected customers,
log in or create an account to download it.
Find our technical sheets and declarations of performance in the generic code product page.
-
Commercial video