ATS-S EVO M12/50x150 (20p)

Generic code 344434

Zinc-plated safety anchor M12/50x150 with hex head 19 screw and pre-mounted washer, for cracked and non-cracked concrete.

See the article code

See related and complementary products

Interested in this product ? Contact us

Applications

Intended use: cracked and non-cracked concrete - Applications for heavy loads.

Advantages

Safety of installation: self-expanding dowel.
High resistance to shear loads.
Delivered complete: dowel + threaded rod + washer + nut assembled.
Seismic approval C1 and C2 (TR045).

Technical characteristics

Type of load	Heavy load
Load recovery	6428 Kg
Installation mode	wrench tightened hammer laying
Length	150 mm
Support drilling diameter	18 mm
Supporting material	Cracked concrete Concrete
Minimum drilling depth	115
Product material	Zinc plated steel
Minimum depth of implementation	100
Pre-assembled product	True
Minimum thickness of base material	176
Effective anchoring depth	88
Maximum thickness of the element to be fixed	50
Diameter of the passage hole	20 mm
Required tightening torque	80 Nm
Content	20 zinc-plated dowels M12/50x150 +20 pre-assembled hexagonal head screws 19 +20 pre-assembled zinc-plated washers.
Outside body diameter	18 mm
Internal diameter	M12
Diameter on thread	12 mm

5 features on 19

See all the offer ATS-S EVO M12/50x150 (20p)

Designation	Article codes	Color label
ATS-S EVO M12/50x150 (20p)	344434000

Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.

Pull Out test

ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.

Discover

Integrated engineering office

We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).

Discover

Software Specif Chevilles

Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.

Discover

In accordance with the ETA 10 0423 anchors ATS EVO ZN

Commercial video

Cartier Paris store

The Etanco group's solution was to supply a whole set of mechanically welded stainless steel parts with articulated arms thus enabling the stone to tilt into a lintel. Our BARACO range of anchors as well as our ISOLCO range of brackets have been chosen and supplied for their high resistance to corrosion, which is essential in a large city subject to pollution.

Find out more on the ETANCO Group website