ATS-N EVO M12x50x150 (20p)
Generic code 344454
- Zinc-plated safety anchor M12x50x150 with threaded rod + pre-mounted H19 nut and washer, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete - Applications for heavy loads.
Advantages
- Safety of installation: self-expanding dowel.
- High resistance to shear loads.
- Delivered complete: dowel + threaded rod + washer + nut assembled.
- Seismic approval C1 and C2 (TR045).
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
6428
Kg |
| Drive |
19
mm |
| Installation mode |
wrench tightened hammer laying |
| Length |
150
mm |
| Support drilling diameter |
18
mm |
| Supporting material |
Cracked concrete Concrete |
| Minimum drilling depth |
115 |
| Product material |
Zinc plated steel |
| Minimum depth of implementation |
100 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
176 |
| Effective anchoring depth |
88 |
| Maximum thickness of the element to be fixed |
50 |
| Diameter of the passage hole |
20
mm |
| Required tightening torque |
80
Nm |
| Content |
20 dowels M12x50x150 zinc-plated +20 threaded rods +20 nuts H19 +20 preassembled zinc-plated washers. |
| Outside body diameter |
18
mm |
| Internal diameter |
M12 |
| Diameter on thread |
12
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0423 anchors ATS EVO ZN
-
DOP cheville ATSDOPDownload -
Homologation European Technical Assessment : ATS EVO /Zn high performance safety peg.Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF ATS-N M12/50x150Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
-
Commercial video
