AT 233G TH12 2C 6.5x50A14 <COULEUR>
Generic code 289500
- Self-drilling screw 6.5x50 with hex head 12 countersink coloured plastic mounted with washer Ø14 aluminium/EPDM, for wooden support or 2 steel sheets max - supracoat 2C body.
Interested in this product ? Contact us
Applications
- Fastening of steel roofing panels, aluminium roofing panels or pre-painted sandwich panels in the top of the corrugations (with bracket) on steel or wood frames.
- Fixing of pre-painted steel or aluminium sheets at the top of the corrugation (with rider) on a wooden frame
Advantages
- Universal screw on steel support (with starter hole) or wood support (without starter hole).
- Resistance to corrosion greater than or equal to 15 Kesternich cycles
Technical characteristics
| Type of the screw tip |
Countersink sharp point (233 G) |
| With flange |
True |
| Flange head diameter |
16
mm |
| Type of thread |
Single thread |
| Pre-drilling |
With pre-drilling on steel only |
| Anchoring depth |
30
mm |
| Product material |
2C Supracoat coated steel |
| Drilling capacity maxi |
2 x 0.75 |
| Head shape |
Hex. Head |
| Support drilling diameter |
5.95
mm |
| pattern hexagonal |
TH 12 |
| Material of the screw head |
Polyamid colored |
| Laquering |
Painted head |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
Alu/ EPDM |
| Outside diameter of the washer |
14
mm |
| Thickness of the flange |
3.8
mm |
| Resistance to corrosion |
15 Kesternich cycles |
| Guaranteed against corrosion for 20 years |
True |
| Installation mode |
Installation with hexagonal screwdriving |
| Supporting material |
Steel Wood |
| Diameter on thread |
6.5
mm |
| Thread pitch |
2.54
mm |
| Length |
50
mm |
| Head height |
9.3
mm |
| Minimum clamping capacity |
0
mm |
| Maximum clamping capacity |
15
mm |
| Maximum assembly capacity |
31
mm |
| Length of the threaded part |
50
mm |
5 features on 30
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Wood anchoring depth for cladding/façade applications: 30 mm min Wood anchoring depth for roofing/sealing applications: 50 mm min. On a steel support, the max. CA should be the selection criterion. Used with a HH12 screwdriving socket.
Interested in this product ?
Contact us