Applications
- Fastening of wood parts on steel frames in corrosive environments.
Advantages
- Bi-metal screw: Countersunk head and stainless steel self-tapping body, drill tip and introduction thread made from galvanised case-hardened steel.
- Screw with wings to ream the hole, allowing unrestricted expansion over the depth to be fastened.
Technical characteristics
| Type of the screw tip |
Self-drilling tip with wings |
| Type of thread |
Single thread |
| Drilling capacity mini |
2 4 |
| Pre-drilling |
Without pre-drilling |
| Product material |
Bi-metal (A2 stainless steel / Steel) |
| Drilling capacity maxi |
12.5 4 5 6 |
| Head shape |
Coutersunked head with ribs |
| Pattern |
Torx |
| Laquering |
Natural head |
| Resistance to corrosion |
30 Kesternich cycles |
| Installation mode |
Installation with torx screwdriving |
| Supporting material |
Steel |
5 features on 12
6 generic codes
Filter:
| Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CA maxi
(mm)
Maximum assembly capacity
|
|
| 288733WINGTEKS 6 Bi-Métal TF/Tx30 A2 6.3x70 | 2 | 6 | 70 | 0 | 48 | |
| 288903WINGTEKS 4 Bi-Métal Tx25 InA2 4.8x45 | 2 | 4 | 45 | 0 | 21 | |
| 288914WINGTEKS 5 Bi-Métal Tx25 InA2 5.5x65 | 2 | 5 | 65 | 0 | 42 | |
| 288958WINGTEKS 5 Bi-Métal Tx25 InA2 5.5x85 | 2 | 5 | 85 | 31 | 62 | |
| 288960WINGTEKS 5 Bi-Métal Tx25 InA2 5.5x109 | 2 | 5 | 109 | 54 | 86 | |
| 288970WINGTEKS 12.5 Bi-Métal Tx25 InA2 5.5x109 | 4 | 12.5 | 109 | 37 | 73 |
generic codes on
- In compliance with DTU 51. 4: Exterior wooden decking.
Interested in this product ?
Contact us