S-TET STOP PI DF/ 2C-L+Rd
- Self-drilling screw with double thread, pilot point / supracoat 2C with extra-flat head Ø14 lacquered hexagonal imprint under head mounted with washer / alu-epdm, for steel support 4 sheets or 2. 5 mm max.
Interested in this product ? Contact us
Advantages
- Special screw to prevent the insulation from being compressed, as the spacer cone limits the tightening to 40 or 60 or 80 mm depending on the model.
- Its double thread prevents deformation of the outer skin during tightening.
- Aesthetic screw.
Technical characteristics
| Type of the screw tip |
Pilote point (PI) |
| Type of thread |
Double hi-thread |
| Drilling capacity mini |
0.63 |
| Pre-drilling |
Without pre-drilling |
| Product material |
2C Supracoat coated steel |
| Drilling capacity maxi |
4 x 0.75 ou 2.5 |
| Head shape |
L extra-flat cylindrical head |
| Pattern |
7 pans (S-TET) |
| Material of the screw head |
Supracoat 2C |
| Laquering |
Painted head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
Alu/ EPDM |
| Outside diameter of the washer |
16 mm |
| Resistance to corrosion |
15 Kesternich cycles |
| Installation mode |
Installation by screwdriving with bit |
| Supporting material |
Steel Assembly of sheet metal |
| Diameter of the head |
14 mm |
| Diameter on thread |
5.5 mm |
| Thread pitch |
1.81 mm |
| Head height |
3.6 mm |
| Length of the threaded part |
13 mm |
5 features on 22
2 generic codes
Filter:
| Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CS Maxi
(mm)
Maximum clamping capacity
|
|
| 265072S-TET STOP DF 2C5.5x70A16 |
0.63 | 4 x 0.75 ou 2.5 | 70 | 40 | 40 | |
| 265092S-TET STOP DF 2C5.5x90A16 |
0.63 | 4 x 0.75 ou 2.5 | 90 | 60 | 60 |
generic codes on
Interested in this product ?
Contact us