CANALZAC SPIRAL/ 2C
- Self-drilling screw with spiral point Ø6. 3 with wings /supracoat 2C with overmoulded hexagonal head /natural zamac mounted with washer Ø30 /galva-epdm, for steel support 18 mm max.
Interested in this product ? Contact us
Applications
- Fastening of half-round tile support panels (PST) on thick steel frames of thicknesses up to 18 mm.
Advantages
- The Zamac post-moulding enables a strong tightening torque.
Technical characteristics
| Type of the screw tip |
Spiral tip with fins |
| With flange |
True |
| Flange head diameter |
16 mm |
| Type of thread |
Threaded with Reamer |
| Drilling capacity mini |
4 |
| Pre-drilling |
Without pre-drilling |
| Product material |
2C Supracoat coated steel |
| Drilling capacity maxi |
18 |
| Head shape |
Hex. Head |
| pattern hexagonal |
TH 12 |
| Material of the screw head |
Overmolded zamac |
| Laquering |
Natural head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
Galva/ EPDM |
| Outside diameter of the washer |
30 mm |
| Thickness of the flange |
3,8 mm |
| Resistance to corrosion |
15 Kesternich cycles |
| Guaranteed against corrosion for 20 years |
True |
| Installation mode |
Installation with hexagonal screwdriving Installation by screwdriving with bit |
| Supporting material |
Steel |
| Diameter on thread |
6,3 mm |
| Thread pitch |
1,81 mm |
| Length |
126 mm |
| Head height |
9,3 mm |
| Minimum clamping capacity |
60 mm |
| Maximum assembly capacity |
83 mm |
| Length of the threaded part |
42 mm |
5 features on 28
1 generic code
Filter:
| Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CA maxi
(mm)
Maximum assembly capacity
|
|
| 339280CANALZAC-SPIRAL TH12 2C 6.3x126G30 | 4 | 18 | 126 | 60 | 83 |
generic codes on
Interested in this product ?
Contact us