VIS A METAUX FT TH13 InA2 8x120
Generic code 69358
- Metal screw M8x120 A2 stainless steel DIN933 hex head 13, fully threaded.
Applications
- Setting screw for adjustable clips on C+ rail.
Technical characteristics
| Type of the screw tip |
Flat end |
| Installation mode |
Installation with hexagonal screwdriving |
| Head shape |
Hex. Head |
| Length |
120
mm |
| Pattern |
Hexagonal (HEX) |
| Length of the threaded part |
120
mm |
| Product material |
A2 Stainless steel |
| Thread pitch |
1.25
mm |
| Type of thread |
Full length thread |
| Diameter on thread |
8
mm |
| Type of baseplate |
Threaded M8 pitch 125 |
| Head height |
5.3
mm |
| Drive |
13
mm |
| Resistance to corrosion |
30 Kesternich cycles 1000 Hours salt fog |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with DTU 45. 4: External thermal insulation systems in cladding with ventilated air gap.
- In compliance with CSTB 3194 specifications: Metal frame and thermal insulation of cladding with AT.
- In accordance with the standard DIN 912.
