TAPCOL F7 /PA +Clou M /Zn
- Hammer-in dowel /polyamide with countersunk collar + pre-assembled nail /zinc-plated with threaded head for collars.
Applications
- Intended use: Solid materials, cracked and non-cracked concrete - Hollow materials with prior testing - High-risk applications.
Advantages
- Quick installation for serial fixing.
- Mounting across.
- Can be removed using Pozidriv screwdriver.
- Delivered complete: assembled anchor + nail.
Technical characteristics
| With flange |
True |
| Flange head diameter |
8,5 mm |
| Installation mode |
Hammer laying |
| Pattern |
Pozidriv(Pz) |
| Supporting material |
Cracked concrete Solid brick Solid concrete block Hollow concrete block with prior testing Cellular concrete with prior testing Natural stone with prior testing Hollow brick with prior testing |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| pattern Pozidriv |
Pozidriv (Pz) 2 |
| Head shape |
Threaded head |
| Support drilling diameter |
6 mm |
| Length |
40 mm |
| Minimum drilling depth |
50 |
| Minimum depth of implementation |
40 |
| Nominal diameter |
3.8 mm |
| Accessory's length |
45 mm |
| Content |
50 polyamide dowels-nails Ø6x40 with countersunk collar + 50 preassembled zinc-plated nails with threaded head M7, 100 pcs. For clamps. |
| Load recovery |
69 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
60 |
| Outside body diameter |
6 mm |
| Diameter on thread |
3,8 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
d
(mm)
Nominal diameter
|
|
| 359250TAPCOL F7 6x40 | 6 | 40 | 50 | 40 | 3.8 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE ETA 10 0190 anchors TAPCO TAP-LARGE
Find our technical sheets and declarations of performance in the generic code product page.
