STARKING Tx40 2C 7x300
Generic code 33510
- Double thread self-drilling screw with countersink 7x300 conical countersunk cylindrical head Ø10.5 Torx40, for wood support - supracoat 2C.
Applications
- Sarking fastening: connection of the counter-battens to the rafters without crushing the rigid or semi-rigid insulation.
Advantages
- Conical countersunk cylindrical head fits perfectly into wood.
- Double thread doesn't squeeze insulation material.
- Countersink sharp point for precise screwing without pre drilling.
- 2C Supracoat coating, can be used in service class 3.
- Inclined thread, higher tearing resistance.
Technical characteristics
| Type of the screw tip |
Countersink sharp point (233 G) |
| Countersinked on tip |
True |
| Type of thread |
Double hi-thread |
| Anchoring depth |
100
mm |
| Pre-drilling |
Without pre-drilling |
| Product material |
2C Supracoat coated steel |
| Head shape |
Narrow Conical Countersunk Head |
| Pattern |
Torx |
| Pattern Torx |
TX 40 |
| Laquering |
Natural head |
| Resistance to corrosion |
15 Kesternich cycles |
| Installation mode |
Installation with torx screwdriving |
| Supporting material |
Wood |
| Diameter of the head |
10.5
mm |
| Diameter on thread |
7
mm |
| Thread pitch |
3
mm |
| Length |
300
mm |
| Head height |
5.9
mm |
| Minimum clamping capacity |
180
mm |
| Maximum clamping capacity |
200
mm |
| Length of the threaded part |
80
mm |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Fasten the screws according to the centre-to-centre distance of the rafters and at specific installation angle. To ascertain the number of screws/m², refer to the Etanco Sarking software. Used with a Torx 40 screwdriving bit.
-
DoP STARKINGDOPDownload -
Fiche Technique STARKING 2C TC Tx40 �7xLTechnical datasheets
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF STARKING SCREW DF TFC Ø7xLDrawings 2D
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings RFA STARKING Tx40 2C �7x300Drawings 3D RFA
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings IFC STARKING Tx40 2C �7x300Drawings 3D IFC
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings STEP STARKING Tx40 2C �7x300Drawings 3D STP
This document is reserved for our connected customers,
log in or create an account to download it.
