S-TET STOP DF A4 5.5x90I16 <COULEUR>
Generic code 266693
- Double thread self-drilling screw 5.5x90 bi-metal hex head 8 lacquered mounted with stainless steel/epdm washer Ø16, for steel support 4 sheets or 2.5 mm max - pilot tip - A4 stainless steel/steel tip.
Interested in this product ? Contact us
Advantages
- Special screw to prevent the insulation from being compressed, as the spacer cone limits the tightening to 40 or 60 or 80 mm depending on the model.
- Its double thread avoiding deformation of the outer skin when tightening.
- Aesthetic screw.
Technical characteristics
| Type of the screw tip |
Pilote point (PI) |
| Type of thread |
Double hi-thread |
| Drilling capacity mini |
0.63 |
| Pre-drilling |
Without pre-drilling |
| Product material |
Bi-metal (A4 stainless steel / Steel) |
| Drilling capacity maxi |
4 x 0.75 ou 2.5 |
| Head shape |
L extra-flat cylindrical head |
| Pattern |
7 pans (S-TET) |
| Material of the screw head |
A4 Stainless steel |
| Laquering |
Painted head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
A2 Stainless steel / EPDM |
| Outside diameter of the washer |
16
mm |
| Resistance to corrosion |
30 Kesternich cycles |
| Installation mode |
Installation by screwdriving with bit |
| Supporting material |
Steel Assembly of sheet metal |
| Diameter of the head |
14
mm |
| Diameter on thread |
5.5
mm |
| Thread pitch |
1.81
mm |
| Length |
90
mm |
| Head height |
3.6
mm |
| Minimum clamping capacity |
60
mm |
| Maximum clamping capacity |
60
mm |
| Length of the threaded part |
13
mm |
5 features on 25
Sold by bag of 100 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Used with a S-TET Gripp single-piece screwdriving socket (324500) + Depth stop (375013).
Interested in this product ?
Contact us