MAX-ISO FM-ISOMAX PE 8/105x160 (200p)
Generic code 358506
- White polypropylene drive anchor with nail 8/105x160 with wide head Ø60, pre-mounted zinc-plated nail with polypropylene head for rigid insulation.
Applications
- Distribution washer for fastening flexible insulation on the façade with MAX ISO anchor.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Sinking with a hammer.
- 60 mm wide head.
- Ø 5 mm metal expansion nail.
- Can be used with additional Ø100 mm washer for soft insulation.
- Heat loss coefficient = 0. 0020 W/K.
Technical characteristics
| Load recovery |
25
Kg |
| With flange |
True |
| Installation mode |
Hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Solid brick Concrete Hollow concrete block Hollow brick Solid concrete block Natural stone Cellular concrete |
| Product material |
Polypropylene + Zinc-plated steel |
| Support drilling diameter |
8
mm |
| Maximum thickness of the element to be fixed |
110 |
| Length |
160
mm |
| Minimum drilling depth |
70 |
| Minimum depth of implementation |
55 |
| Content |
200 dowels Ø8/105x160 polypropylene + 200 unassembled zinc-plated nails with polypropylene head. |
| Outside body diameter |
8
mm |
| Minimum thickness of base material |
100 |
Sold by case of 200 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 23 0687 MAX ISO
