MARCOVIS FM-X5s CL+Vis TH/InA4
- Wide flange dowel /polyamide + pre-mounted hexagon head screw torx /stainless steel A4, for solid and hollow materials.
Applications
- Intended use: Non-cracked concrete, solid and hollow materials with prior testing.
Advantages
- All-purpose anchor for solid and hollow materials.
- Through-hole installation.
- Smooth screwing (low torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Type of flange |
Large |
| Flange head diameter |
19 mm |
| Installation mode |
Hammer laying Installation with torx screwdriving Installation with hexagonal screwdriving |
| Pattern |
Hexagonal (HEX) |
| Supporting material |
Concrete Hollow brick Solid brick Hollow concrete block Solid concrete block Cellular concrete with prior testing Natural stone with prior testing |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Stainless steel A4 |
| Pre-assembled product |
True |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
10 |
| Length |
60 mm |
| Minimum drilling depth |
60 |
| Minimum depth of implementation |
50 |
| Accessory's length |
65 mm |
| Content |
50 x Ø10/10x60 polyamide dowels with wide collar + 50 pre-mounted A4 stainless steel screws with hexagonal head 13, Torx40 socket, with wide collar. |
| Load recovery |
114 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10 mm |
| Diameter on thread |
7 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 360620MARCOVIS FM-X5s CL TH13 A4 10/10x60 (50) | 10 | 60 | 60 | 50 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover