SUPER ISO II +Clou /PA
- Ø60 wide head polypropylene dowel-nail + pre-assembled black polyamide nail, for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Sinking with a hammer.
- 60 mm wide head.
- Plastic expansion nail Ø 5 mm.
- To be used with additional Ø140 mm washer for flexible insulation.
- Heat loss coefficient = 0.0012 W/K.
Technical characteristics
Load recovery |
12.0 Kg |
With flange |
True |
Installation mode |
hammer laying |
Type of flange |
Large |
Flange head diameter |
60.0 mm |
Supporting material |
cellular concrete Concrete Solid brick Solid concrete block Hollow concrete block with prior testing Natural stone with prior testing Hollow brick with prior testing |
Product material |
Polypropylene + PA6 polyamide |
Support drilling diameter |
10.0 mm |
Minimum drilling depth |
50 |
Minimum depth of implementation |
45 |
Outside body diameter |
10.0 mm |
Minimum thickness of base material |
100 |
Generic code | Tfix maxi
Maximum thickness of the element to be fixed
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
358560SUPER ISO II 10/45x90 (BTE 300) | 45 | 90 | 50 | 45 | |
358562SUPER ISO II 10/65x110 (BTE 200) | 65 | 110 | 50 | 45 | |
358564SUPER ISO II 10/75x120 (BTE 200) | 75 | 120 | 50 | 45 | |
358566SUPER ISO II 10/90x135 (BTE 200) | 90 | 135 | 50 | 45 | |
358568SUPER ISO II 10/105x150 (BTE 200) | 105 | 150 | 50 | 45 | |
358570SUPER ISO II 10/125x170 (BTE 200) | 125 | 170 | 50 | 45 | |
358572SUPER ISO II 10/145x190 (BTE 200) | 145 | 190 | 50 | 45 | |
358574SUPER ISO II 10/155x200 | 155 | 200 | 50 | 45 | |
358576SUPER ISO II 10/175x220 (200) | 175 | 220 | 50 | 45 | |
358578SUPER ISO II 10/195x240 | 195 | 240 | 50 | 45 | |
358580SUPER ISO II 10/215x260 | 215 | 260 | 50 | 45 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 11 0280 anchors SUPER ISO II
Find our technical sheets and declarations of performance in the generic code product page.