SUPER ISO II Mt +Clou /Zn
- Ø60 wide-headed polypropylene dowel-nail + pre-assembled red plastic-headed zinc nail for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Hammered in.
- 60 mm wide head.
- Expansion nail Ø 5 mm.
- To be used with additional Ø140 mm washer for flexible insulation.
- Heat loss coefficient = 0.0020 W/K.
Technical characteristics
| Load recovery |
14 Kg |
| With flange |
True |
| Installation mode |
hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60 mm |
| Supporting material |
cellular concrete Hollow brick Hollow concrete block Solid concrete block with prior testing Natural stone with prior testing Solid brick with prior testing |
| Product material |
Polypropylene + Zinc-plated steel |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
105 125 145 155 175 195 215 45 65 75 90 |
| Minimum drilling depth |
50 |
| Minimum depth of implementation |
45 |
| Content |
200 dowels Ø10/105x150 polypropylene +200 unmounted galvanised nails. 200 dowels Ø10/125x170 polypropylene +200 unmounted zinc-plated nails. 200 dowels Ø10/145x190 polypropylene +200 zinc-plated nails not mounted. 200 dowels Ø10/155x200 polypropylene +200 unassembled galvanised nails. 200 dowels Ø10/175x220 polypropylene +200 unmounted galvanised nails. 200 dowels Ø10/195x240 polypropylene +200 zinc-plated nails not mounted. 200 dowels Ø10/215x260 polypropylene +200 unmounted galvanised nails. 200 dowels Ø10/65x110 polypropylene +200 unmounted galvanised nails. 200 dowels Ø10/75x120 polypropylene +200 unmounted zinc-plated nails. 200 dowels Ø10/90x135 polypropylene +200 zinc-plated nails not mounted. 300 dowels Ø10/45x90 polypropylene +300 unmounted galvanised nails. |
| Outside body diameter |
10 mm |
| Minimum thickness of base material |
100 |
| Generic code | Tfix maxi
Maximum thickness of the element to be fixed
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 358559SUPER ISO II 10/45x90Mt | 45 | 90 | 50 | 45 | |
| 358561SUPER ISO II 10/65x110Mt (BTE 200) | 65 | 110 | 50 | 45 | |
| 358563SUPER ISO II 10/75x120Mt (BTE 200) | 75 | 120 | 50 | 45 | |
| 358565SUPER ISO II 10/90x135Mt (BTE 200) | 90 | 135 | 50 | 45 | |
| 358567SUPER ISO II 10/105x150Mt (BTE 200) | 105 | 150 | 50 | 45 | |
| 358569SUPER ISO II 10/125x170Mt (BTE 200) | 125 | 170 | 50 | 45 | |
| 358571SUPER ISO II 10/145x190Mt | 145 | 190 | 50 | 45 | |
| 358573SUPER ISO II 10/155x200Mt | 155 | 200 | 50 | 45 | |
| 358575SUPER ISO II 10/175x220Mt | 175 | 220 | 50 | 45 | |
| 358577SUPER ISO II 10/195x240Mt | 195 | 240 | 50 | 45 | |
| 358579SUPER ISO II 10/215x260Mt | 215 | 260 | 50 | 45 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 11 0280 anchors SUPER ISO II
Find our technical sheets and declarations of performance in the generic code product page.
