NAILFIX TB /GàC
- Bare / hot-dip galvanised friction nail with domed head, for concrete.
Applications
- Intended use: Concrete - Applications excluding heavy loads.
- Fixing of insulation and waterproofing on concrete with a spreader plate.
Advantages
- Concrete nail to be hammered in.
- Quick to install.
- Non-removable fixing.
- High resistance to corrosion.
Technical characteristics
| Flange head diameter |
10 mm |
| Installation mode |
hammer laying |
| Supporting material |
Concrete |
| Product material |
Galvanized steel |
| Head shape |
Rounded head |
| Support drilling diameter |
5 mm |
| Minimum drilling depth |
50 |
| Load recovery |
166 Kg |
| Type of load |
Light load |
| Outside body diameter |
4 mm |
| Effective anchoring depth |
40 |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
|
| 359600NAILFIX TB/CH 4.5x45 | 5 | 45 | 50 | |
| 359602NAILFIX TB/CH 4.5x55 | 5 | 55 | 50 | |
| 359604NAILFIX TB/CH 4.5x65 | 5 | 65 | 50 | |
| 359606NAILFIX TB/CH 4.5x75 | 5 | 75 | 50 | |
| 359608NAILFIX TB/CH 4.5x85 | 5 | 85 | 50 | |
| 359610NAILFIX TB/CH 4.5x100 | 5 | 100 | 50 | |
| 359612NAILFIX TB/CH 4.5x120 | 5 | 120 | 50 | |
| 359614NAILFIX TB/CH 4.5x150 | 5 | 150 | 50 | |
| 359616NAILFIX TB/CH 4.5x180 | 5 | 180 | 50 | |
| 359618NAILFIX TB/CH 4.5x200 | 5 | 200 | 50 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- Benefit from a test report VERITAS dme 79341901 anchors NAILFIX. Except articles codes (359616, 359612, 359614 )
Find our technical sheets and declarations of performance in the generic code product page.
